Ideal agitating for homogeneous liquids
The new generation of Stallkamp submersible motor agitators combines proven Stallkamp quality with technical improvements. The rotational speed of generation 3 rises to 273 rpm. The welded motor casing is replaced by a casing that is deepended from one part with the Stallkamp-Press. And the screwed single blades for the impeller are replaced by welded blades. The Stallkamp agitator will be the durable turbo-charge in your system.
Our Sænkbar Motor Agitator TMR 3D at a glance
- Three phase motor 400 V, 50 Hz, 1,450 rpm, electric motor with oil filling
- Insulating category F = 155 °C, protection category IP68
- Thermo-control for each phase as overheating protection
- Motor housing in stainless steel
- Gearbox housing and motor cover made of cast iron coated with 2-component plastic paint
- Planetary gear
- Propeller rotational speed 273 rpm
- As standard highly wear-resistant slide ring sealing
- Electric cable: 10 m with cast screw connection and 10 stainless steel cable clamps with rubber inserts and stainless steel shackles
- Special electric cable with source-bodies as protection against humidity along the length of the cable, with interior FEP sheath and exterior polyurethane sheath
- Stainless steel sliding guide with depth stop for guide rail 100 x 100 mm
- Submersion depth max. 10 m (other depths on request)
3 blade optimised agitator for:
- thick manure and bio-mass in biogas plants.
- Individually adjustable submersion depth
- Liquid jet and direction of fl ow can be adjusted as required
- High-powered agitation
- Eco-friendly and economical operation
- Optimum media homogenisation
- Excellent value for money
- High quality from our in-house manufacturing
- A wide range of accessories
| Type | Motor Power | Start-Up | Nominal Current | Required Protection | Number of Revolutions Motor/Blades | Total Weight |
|---|---|---|---|---|---|---|
| TMR 040 | 4,0 kW | Y/Δ | 9,0 A at 50 Hz | 16 delay | 1450/273 rpm at 50 Hz | 105 kg |
| TMR 055 | 5,5 kW | Y/Δ | 11,4 A at 50 Hz | 20 delay | 1450/273 rpm at 50 Hz | 110 kg |
| TMR 075 | 7,5 kW | Y/Δ | 16,0 A at 50 Hz | 25 delay | 1450/273 rpm at 50 Hz | 137 kg |
| TMR 110 | 11,0 kW | Y/Δ | 22,1 A at 50 Hz | 32 delay | 1450/273 rpm at 50 Hz | 177 kg |
| TMR 170 | 17,0 kW | Y/Δ | 33,0 A at 50 Hz | 50 delay | 1450/273 rpm at 50 Hz | 187 kg |
| TMR 220 | 22,0 kW | Y/Δ | 43,0 A at 50 Hz | 63 delay | 1450/273 rpm at 50 Hz | 197 kg |
| Type | A at 50 Hz | B | C | D | E | F | G |
|---|---|---|---|---|---|---|---|
| TMR 040 | 450 mm | 368 mm | 829 mm | 739 mm | 956 mm | 350 mm | 1.000 mm |
| TMR 055 | 500 mm | 368 mm | 829 mm | 739 mm | 956 mm | 400 mm | 1.020 mm |
| TMR 075 | 550 mm | 368 mm | 829 mm | 739 mm | 956 mm | 440 mm | 1.040 mm |
| TMR 110 | 610 mm | 410 mm | 952 mm | 862 mm | 1.079 mm | 500 mm | 1.150 mm |
| TMR 170 | 650 mm | 410 mm | 952 mm | 862 mm | 1.079 mm | 550 mm | 1.170 mm |
| TMR 220 | 700 mm | 410 mm | 952 mm | 862 mm | 1.079 mm | 610 mm | 1.215 mm |
