Optimum circulation in every channel form and dimension
The Stallkamp submersible motor agitators in circulation frame are optimally suited for agitating ring or circulation systems underneath the animal shed. It is possible to use more than one device, depending on the animal shed (system overall length / channel width or depth). Efficient results can be achieved thanks to a control, e.g. with time switches.
Our Sænkbar motor omrører med cirkulationsramme TMR-Z at a glance
- Electric-motor 7,5–22,0 kW
- Three phase motors 400 V, 50 Hz, 1,450 rpm
- IP68 protection category, insulating category F = 155 °C
- Thermo-control for each phase as overheating protection
- Motor housing in V2A - 1.4301 stainless steel
- Pump housing and motor cover made from cast iron material coated with 2-component plastic lacquer
- Propeller speed: 273 rpm
- Sealing: highly wear-resistant slide ring seal as standard
- Electric cable with moulded connection with water-blocking devices along the cable for moisture protection; special PU outer sheathing
- Circulation frame in V2A - 1.4301 stainless steel
- Electric switch: Manual star-delta or automatic star-delta starter with motor protection switch and CEE plug
- suited to agitating ring or circulation systems underneath the animal stable
- Stationary installation
- No motor visible outside the animal shed
- Can be used with U or Z-profi le
- Optionally also for systems with sliding rails
- Bulkhead plates made from 1.4301 stainless steel
- Optimum agitation characteristics by forcing the medium through the agitator
- A reception pit is no longer necessary
- Optionally with reverse switch
| Type | Motor Power | Start-Up | Nominal Current | Required Protection | Number of Revolutions Motor/Blades | Circulation Rate | Total Weight |
|---|---|---|---|---|---|---|---|
| TMRS 075 | 7,5 kW | Y/Δ | 16,0 A | 25 delay | 1450/483 rpm at 50 Hz | 4650 m3/h | 219 kg |
| TMR 075 | 7,5 kW | Y/Δ | 16,0 A | 25 delay | 1450/373 rpm at 50 Hz | 3590 m3/h | 219 kg |
| TMR 110 | 11,0 kW | Y/Δ | 19,3 A | 32 delay | 1450/373 rpm at 50 Hz | 5103 m3/h | 265 kg |
| TMR 170 | 17,0 kW | Y/Δ | 30,1 A | 50 delay | 1450/373 rpm at 50 Hz | 6392 m3/h | 276 kg |
| TMR 220 | 22,0 kW | Y/Δ | 37,0 A | 63 delay | 1450/373 rpm at 50 Hz | 7359 m3/h | 292 kg |
TMRS 075 - Our Speedy with a very high rotational speed especially for pig manure!
| Type | A Brede | B Højde | C Længde | D Blade | E Nozzle Ø | F Tykkelse | G Nozzle Distance til ramme |
|---|---|---|---|---|---|---|---|
| TMRS 075 | 970 mm | 975 mm | 879 mm | 450 mm | 500 mm | 38 mm | 235 mm |
| TMR 075 | 970 mm | 975 mm | 950 mm | 550 mm | 600 mm | 38 mm | 185 mm |
| TMR 110 | 970 mm | 975 mm | 1.033 mm | 610 mm | 660 mm | 38 mm | 155 mm |
| TMR 170 | 970 mm | 975 mm | 1.095 mm | 650 mm | 700 mm | 38 mm | 135 mm |
| TMR 220 | 970 mm | 975 mm | 1.195 mm | 700 mm | 750 mm | 38 mm | 110 mm |
