Power with multiple benefit!
Stallkamp long-shaft high pressure pump are heavy duty and are perfectly suitable for reception pits and manure pits to a depth of 6 m. Either with sturdy electric motors (up to 22 kW/30 PS) or tractordriven, Stallkamp long-wave pumps are a powerful and longlasting centrepiece for manure and biogas plants with both f xed piping systems and flushing pipes.
Our Højtrykscentrifugalpumpe med lang aksel at a glance
- Pump housing made from cast iron material coated with 2-component plastic lacquer
- Large capacity pump housing and therefore resistant to foreign bodies and blockages
- Impeller top suction with auger feed
- Impeller and feeder ring plated with WIDIA sintered carbide
- Pump bearings and seals with radial shaft seal rings on special acidresistant hardened rings
- Drive shaft running through oil bath, casing tube made of stainless steel
- Dipstick in casing tube for checking oil levels
- Stretch coupling (in electric drive only)
- Thermo-control per phase for overheating protection (in electric drive only)
- Especially for operations in pre-lagoons
- Ideal for high outgassing manure
- Biomass in biogas plants
- Virtually unaff ected by foreign bodies and blockages
- Long lifespan thanks to a stretch coupling (in electric drive only)
- Fibres of silage or straw in the manure are shredded
- High flow rates and delivery pressures
- Pumping medium temperature up to 70 °C
- Flexibility thanks to perfect standard equipment and a comprehensive range of accessories
- Electric or PTO drive
| Type | Motor Power | Start-Up | Nominal Current | Required Protection | Number og Revolutions | Maximum Pressure | Flow Rate | Ball Gangway | Sound Level** |
|---|---|---|---|---|---|---|---|---|---|
| LKP 110 | 11,0 kW | Y/Δ | 22,0 A | 32 delay | 1450 rpm | 2,0 bar | 200 m3/h | Ø48 mm | 67 dB (A) |
| LKP 150 | 15,0 kW | Y/Δ | 28,0 A | 50 delay | 1450 rpm | 2,5 bar | 250 m3/h | Ø48 mm | 67 dB (A) |
| LKP 185 | 18,5 kW | Y/Δ | 36,0 A | 50 delay | 1450 rpm | 3,2 bar | 300 m3/h | Ø48 mm | 67 dB (A) |
| LKP 220 | 22,0 kW | Y/Δ | 43,0 A | 63 delay | 1450 rpm | 4,0 bar | 350 m3/h | Ø48 mm | 67 dB (A) |
| LKP-T | Mitre gear, power take off shaft 540 - rpm | 1620 rpm | 4,4 bar | 400 m3/h | Ø48 mm | --- | |||
** In submerged condition
The flow rate (volume flow rate in m³) is dependent on the density and viscosity of the liquid, the type and the DM content of the manure (animal feed), the support height and distance and the diameter of the pipeline.
